HandyCable Heating Cable

HandyCable DVC-10

Application: Underfloor heating, freeze protection

HandyCable: Twin conductor Teflon insulated heating cable. Like the HandyMat, it can be laid onto existing floors & covered by tile adhesive, but comes as one length of cable which is layed out and run into any shaped room or area. Cables can be used in any room, no matter how irregular the shape.

Universal Twin-Conductor Heating Cable

HandyCable® DVC-10 has been installed in thousands ofhomesacross Europe, adding soothing, comfortable warmth to bathrooms,kitchens, covered patios and conservatories .

DVC-10 cable makes installation easier and faster, whether it is electrical floor heating in new buildings or renovating old buildings.

The DVC heating cable offers the highest quality in heating systems. Our Cable is made by long lasting conductor wire and has a durable PVC plastic outer sheath.

The cable is available in ready-made sets from 150 to 2000 Watts, making it ideal for installation in any size of room.

Product features: Round Twin conductor 360° flexible One cold tail 3 mm Kevlar® enforced strength Teflon primary insulation 10 W / Linear metre

Typical application areas: Floor heating in houses, offices, factories,shops, schools, etc. Frost protection of pipes

More info

Top

HandyCable DVT-20

Application: Underfloor heating, freeze protection, gutter & drain, Ice- and snow melting.

HandyCable: Twin conductor teflon insulated heating cable with concentric construction. The 20w per linear metre in-screed cable is designed to be installed in a concrete screed (usually 60-100mm).
The output is varied by the cable spacing & usually ranges from 100-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an 'off-peak' solution is required.
This cable is also ideal for use directly below thick stone & flagstone type flooring.
In-screed cables are a low cost solution & are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g. conservatory for ad-hoc use) we recommend the under-tile system with insulation boards.

New Flexible Twin-Conductor Heating Cable

Dansk Varmekabel’s new HandyCable® DVT cable with HandyHandyHeat Accessories makes installation easier and faster, whether it is electrical floor heating in new buildings or renovating old buildings.

The DVT heating cable offers the highest quality in heating systems.

Our cable is made by long lasting conductor wire and has a durable PVC plastic outer sheath. The cable is available in ready-made sets from 240 to 3500 Watts, making it ideal for installation in almost any size of room.

Product features: Round Twin conductor 360° flexible One cold tail 6 mm 7 standed core conductor Teflon primary insulation 20 W/30 W/Linear metre

Typical application areas: Floor heating in houses, offices, factories, shops, farms, schools, etc. Ice and snow melting in stairs and driveways Storage floor heating Soil warming

 

More info

Top

HandyHeat DVT-30

Application:Underfloor heating, Ice- and snow melting.

HandyCable: Twin conductor teflon insulated heating cable with concentric construction. The 30w per linear metre in-screed cable is designed to be installed in a concrete screed (usually 60-100mm)

The output is varied by the cable spacing & usually ranges from 100-150w per sqm in a new build or extension, up to 200w per sqm in a conservatory, or where an 'off-peak' solution is required.

This cable is also ideal for use directly below thick stone & flagstone type flooring.
In-screed cables are a low cost solution & are designed to be used where regular constant heat is required. Where irregular heating is needed (e.g. conservatory for ad-hoc use) we recommend the under-tile system with insulation boards

More info