HandyHeat Accessories

HandyHeat Spindle HandyHeat Spindle

HandyHeat Spindle System eases installation and reduces time fitting the floor heating system.

The  system consists of a special spindle, which fits the  HandyHeat card box reel or the HandyHeat plastic reel. All cables can be supplied with either a card box reel or a plastic reel and a HandyHeat spindle.

Dispensing the cable from the reel is easy and runs smoothly without looping of the cable! Even when handling long and heavy cables! Just place the HandyHeat spindle on a spike, place the reel on the spindle and pull at the cable!

 

Top

HandyFix Band

HandyFix BandHandyFix band is for fixing 7 mm HandyCable with flexible c-c distances at 25-mm intervals.

Consider 1 metre HandyFix band every 6-metre cable.

HandyFix is available with or without double-sided tape for mechanical fitting.

 

 

 

Top

HandyHeat Varmetape

HandyHeat VarmetapeThis Varme tape is double adhesive, 80 m long.It is suitable for fixing heating cable with the desired c-c distance & is used  for DVC-10 / FH – 10 heating cables.

 

 

Top

HandyHeat Cable MonitorHandyHeat Cable Monitor

HandyHeat Cable Monitor

            
Suitable for testing heating cables, heating mats and heating film before, during and after installation.

With the help of this device  function of the heating cable is tested during the instalation.

By trouble-shooting of heating cable/mat the installation  work can be stopped  and the fault can be fixed before the floor is laid out. 2 available colours: black & silver.

Download instruction manual for HandyHeat Cable Monitor

Top

HandyHeat Alu Tape

HandyHeat Alu TapeAlu Tape 25 m x 50 mm is suitable for fixing  DVU heating cable. The heating cable is fastened underneath the pipe with the help of Alu tape. This fixing provides also a low contact resistance to the pipe because Alu tape is good at distributing the heating. Approved till 120 ºC   

 

 

Top

    
HandyHeat Cold cable with a thermostat and a  Schuko plug

HandyHeat Thermostat with a Schuko plug Wire with thermostat is a perfect solution for  controlling selfregulating cables. Thermostat is activated by the temperature of +5°C and deactivated by temperature of +8°C, hereby providing the frost protection of pipe constructions without waste of  energy.

 

Top Select Language